I would like to e85 it at a later date so I bought injectors that would for that. I actually have a set of 50lb injectors in my toolbox.
FLYCUT TORQUER V2 INSTALL
At that point, you can raise the rev limiter and the WOT shift points in order to get the best performance from your combo.ĭAAAAAAAM Gina! Thanks for the info! I plan to install bigger injectors after I get this turd sandwich running decent enough. I'd also recommend installing some 12613412 GM flex fuel injectors. Then you can make sure that the tune is dialed in.(the VE table looks suspiciously high.) Go to transmission TM and disable the abuse mode.Īll of these changes will help it feel much stronger and will firm up the transmission shifting (very important with the 6.0L engine and larger tires.) Hp tuners normal upshift pressure table.png
Increase the ETC Injector Disable table to 255.Ĭhange the part throttle shift table to mimic the one below.Ĭhange the Normal upshift pressure table to mimic the following table. Increase the ETC TPS Limits table to 100. Increase the Max torque vs rpm table by 10%.
Go to the engine TM tab and increase the Max Torque limit to 500 lb ft. Increase the burst knock enable delta table to 7.9. Lower the PE Min Torque threshold to 70% and Min hysteresis to 5%. There are several things that will help it feel a lot stronger.
0 kommentar(er)
